Just bought some used projector lights 95-99 style,installed them with just the stock bulb setup until I get the right bulbs. I know your brights are on the inside and low on the outside so since I have the projector on the outside then that obviously is the low beam. Ok so now my DRLs' do not work although the dash light indicates that they are on and when I start the car and turn on my lights and have them on the low beam the inside high beam is actually on.When I click the high beams on ,dash light shows high beams on,and the outside lows(projectors) come on.I know it's not backwards because after taking the stockers out I hooked it up the same way.Any help??
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
bump need help
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
check it all again. you might remember putting it in the right way but you might have got them mixed up. the 9005 bulb is brights and the 9006 is low beams.. but really i dont understand why your drls isnt working.. but the drl could have been in the projector if the bulbs are switched, and just being so low of light not to visible in the projector..
thanks Manta,I MUST have mixed them up,no other way
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
ok Manta was right but went today and bought Silverstar low beams and it still doesn't seem very bright,could it be they need to be adjusted or the projector lens cleaned??
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Selling these projectors,want black ones,so my loss is your gain,I paid$ 82 shipped,sell for $40 shipped
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
All projectors will give you horrible light output without HIDs
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
Even with Silverstars,wow that sucks,thanks SATCH
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
yup even with silverstars
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
cleaned the inside of the projector lens on both lights and they were filthy,but is there supposed to be a half plate inside the projector,to have something to do with spreading the light pattern???
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
that plate is to make the cut off line in the light. dont take it out unless you want everyone flashing their brights at you.
simple minds talk about other people.
average minds talk about events.
great minds discuss ideas
That is what I figured,thanks
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
*Still for sale*
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
