Has anyone ever tried this? they look like they might fit with some mods done to it

http://cgi.ebay.com/ebaymotors/93-97-MAZDA-RX7-RX-7-2-HALO-PROJECTOR-HEAD-LIGHTS-LAMPS_W0QQcmdZViewItemQQcategoryZ33710QQihZ024QQitemZ370017511483QQrdZ1QQsspagenameZWDVW

i believe it was Brandon Fetter who put a set on a sunfire. looked pretty good, but the car had a ton of mods including a custom widebody. headlight swaps are a ton of work, or a lot of money, or both.

I think Eazy is currently working on his own with projectors to sell, they wont be exactly rx7 lights but they will look very similar.

Damn no "edit" button, look for Joey Baggs a.k.a. Eazy and you will see what im talking about.

Those do look like they would mount up pretty easily on a sunfire.

those may fit decently, but just looking at the pic one of the big issues is you'll have to cut off the mouting bracket on the side... then some how fab up your own mouting device.

yeah fetter did that swap. looked bad ass, but like cannon pointed out, it had many more crazy mods to go with it. the lights themselves are much bigger than the stock sunfire ones so you will have some work to do, thats for sure.




coming back in 2008...

It was Derek (Brandons brother). It's a little more work then it looks like to get them to blend.

http://www.j-body.org/forums/read.php?f=46&i=212299&t=212299#212299





"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"

^ that poor car



Proud member of Jbody of Kentucky ... Click on sig to go!

Quote:

ohn317(AKA Gary the Old guy)




It was Derek (Brandons brother). It's a little more work then it looks like to get them to blend.

http://www.j-body.org/forums/read.php?f=46&i=212299&t=212299#212299

is there a build post or a photo gallery of this car people i kno are dying to get more info about this car

no official build thread, although there were a handful of pics posted at one point or another. click derek's registry and do a search based on his username and all of his posts will come up (choose "exclude replies" from the drop down list at the right) then just see what he has posted




coming back in 2008...

Luis Marroquin wrote:I think Eazy is currently working on his own with projectors to sell, they wont be exactly rx7 lights but they will look very similar.

thanks bud

Hopefully I should be finishing up Joe's bezel tonight and at some point starting on them this coming week.

JoeyDaBomb wrote:^ that poor car

If you only knew.... Seeing the remains in person gave me chills......



P&P Tuning
420.5whp / 359.8wtq

I am currently in the process of putting those headlights in my Fire.
Fetters car has been my inspiration for alot of my build this winter.


ShowFire

Joey Baggs (JCE Designs) wrote:

Luis Marroquin wrote:I think Eazy is currently working on his own with projectors to sell, they wont be exactly rx7 lights but they will look very similar.

thanks bud

Hopefully I should be finishing up Joe's bezel tonight and at some point starting on them this coming week.

no worries joey, i respect you as an org member and plus im digging your progress and will probably be buying from you in the future. i was the one that asked you for some type of lip for the 95-99 2dr sunfire SE

***sorry to thread jack!***

ShowFire wrote:I am currently in the process of putting those headlights in my Fire.
Fetters car has been my inspiration for alot of my build this winter.

I Demand pics...... asap!!

haha well I havent started the headlights yet, I have about 3/4s of the wide body done, once I get the metal work done for it (yes I am doing a steel wide body) I will start fitting the headlights.
I do have the headlights sitting here and Have already done some sizing up to get them in.
It is more work then you think, they aren't exactly a little trim to fit lol.


ShowFire