Ways to reduce wheel gap without lowering? - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Ways to reduce wheel gap without lowering?
Tuesday, July 29, 2014 7:29 PM
Any advice is appreciated. I don't have the money to lower my car properly other than cheap eBay springs on stock struts. I don't want to do that. Is there another way?

Re: Ways to reduce wheel gap without lowering?
Tuesday, July 29, 2014 7:43 PM
Used quality parts..
Re: Ways to reduce wheel gap without lowering?
Wednesday, July 30, 2014 8:09 PM
Larger tires...
Re: Ways to reduce wheel gap without lowering?
Thursday, July 31, 2014 3:35 AM
Larger tires....but the front spring perches will become a problem if you do not space our the front wheels a little. If you do run spacers longer wheel studs are probably needed.

The rear should clear fine, but I would space them out to match the front.






Re: Ways to reduce wheel gap without lowering?
Thursday, July 31, 2014 8:02 PM
My front wheels already stick out about a cm from the fender lol. I'm running 245/45/17. I might just wait to lower.
Re: Ways to reduce wheel gap without lowering?
Thursday, July 31, 2014 9:11 PM
Corey Calhoun wrote:

My front wheels already stick out about a cm from the fender lol. I'm running 245/45/17. I might just wait to lower.


245/40 my bad
Re: Ways to reduce wheel gap without lowering?
Friday, August 01, 2014 7:46 AM
Stick a couple fat chicks inside. That should lower it nicely.
Re: Ways to reduce wheel gap without lowering?
Friday, August 01, 2014 12:32 PM
I have a set of Eibach pro kit springs for sale. $150 shipped for 1 year old springs an $75 shipped for a older set with a small piece broke off the tip (can file a claim thru Eibach for a new set) pm me if your interested.
Re: Ways to reduce wheel gap without lowering?
Friday, August 01, 2014 6:34 PM
Pm to show the chip.

The fat girls method doesn't work for me, but I guess if that works for you then you can have hydraulics if you tell them to jump around.
Re: Ways to reduce wheel gap without lowering?
Thursday, August 07, 2014 2:40 AM
NO ,JUST WORK HARD ,PULL DOUBLE SHIFTS OR GET A SECOND JOB LIKE I DID .BE PATIENT, SAVE UP SOME CASH AND THEN GO OUT AND BUY SOME GOOD PARTS AND DO IT RIGHT THE FIRST TIME.TRUST ME YOU WONT REGRET IT!


BLACKMANTIS
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search