now were talkin boys!!!!!!!! lighting up ish is my bag, baby!
I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Then why still an auto?
- Your not-so-local, untrained, uncertified, backyard mechanic. But my @!#$ runs
Because two pedals are lighter than three??
Brad probably cant drive a stick.
Taetsch Z-24 wrote:Ours do not have the Teflon coating.
MP62's do though.
I asked Tom (wrenchmonky) and so far he has yet to find my old tune, If I find it ill post it for all to use.
I think I have my new 02 close to the old one though.
Lighting it should do it for relieving stress....
I was also thinking that the TVS R900 (m45 size) form should be a direct swap for rotors.... want me to look in to it with Eaton?
Chris
Actually our does have the coating. I saw it, and STG even mentioned to Ryan about removing it.
FU Tuning
Then the two that I rebuilt did not.
Every one that had a coating on it was black, mine were silver.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Yes mine was black, well black and silver. lol
STG commented to Ryan that I must have been running alot of meth, lol I was.
FU Tuning
oh ef yes. i DO have wade's shifted tune. this is great news!
I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Taetsch Z-24 wrote:Ours do not have the Teflon coating.
MP62's do though.
I asked Tom (wrenchmonky) and so far he has yet to find my old tune, If I find it ill post it for all to use.
I think I have my new 02 close to the old one though.
Lighting it should do it for relieving stress....
I was also thinking that the TVS R900 (m45 size) form should be a direct swap for rotors.... want me to look in to it with Eaton?
Chris
I don't think the tvs rotors will fit. They are a completely different design.
Yep. Got my answer.
Quote:
Eaton does not manufacture or sell any upgraded parts for OEM or aftermarket superchargers. Rotors and housings are not interchangeable so you cannot upgrade your 5th generation M90 with TVS rotors for example.
Worth speaking with them about though.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
so.. cams... dubs, or do i have a set of these blanks custom ground special for a blowa?
I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
Why not just use a 2.3 head then?
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
because i dont want to overheat.
I choose the technology built for land speed records... not the technology built to save on emissions and gas mileage.
brad lol i would have taken you out with my car. no boost and no juice.
lol yes probably. i spin a lot more than you did man. im thinking about putting the teins on mine.
It's nice to be injected but I love being blown.
But not so much on the road, close, 103 VS 100
So like half a bumper. would have been a good run.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
his car had a lot more in it chris. it was never fully dyno tuned nor did it ever see some real good tires with the good suspension.
that car had a 12 second n/a pass in it at sea level...
It's nice to be injected but I love being blown.
Still talk... More DOING*
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
no doing lol. he'll run 12's na for sure with the drivetrain hes putting into it lol
It's nice to be injected but I love being blown.
LOL right! All the BSers shut the fuk up with ACTION
"He'll run for sure"
see, not DOING
Ergo: Action
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
lol chris.... 5.3 LSX rwd swap. thats all ima say.
It's nice to be injected but I love being blown.
♥
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
welp, got some more old school info on m45 that came to light. does anybody know a brett cohagen from michigan? apparently he ran an m45 and spray back in the day... his sig says "13.56@107.82mph" through reading his posts on the subject it was either on a 20 shot or a 50 shot.
then in
this thread i found this out...
95nosz24 wrote:Lowpro dynoed at 206hp@the wheels on the charger, and 268hp and 256 torque using the SC and a 70 shot NOS dry kit. The next day he ran a 13.2 @110mph. Blower was making 5psi.
lol that takes some balls to run a dry shot with the m45, i must say.
It's nice to be injected but I love being blown.
these numbers are JUST the blower. no spray. working on the with spray list as well as the twin charged list...
1.) Chris Taetsch (
taetschz24) --------------------------
13.79@102.45
2.) John Miller (
jmiller (JM Graphics the sticker guy) -
13.901@103.5 (auto)
3.) Nate S. (
C24s/c) ---------------------------------------
13.940 @ 99.78
4.) Ron (
Ron)---------------------------------------------------
13.91 @ 98.24
5.) John Higgins (
Addicted to Meth)----------------------
14.143@98
6.) Clyde Moore (
mitdr774) ------------------------------
14.267@99.20
7.) Scott Kesterke (
Lafngas)-----------------------------
14.3xx @ 98.xx
8.) Jered Methe (
methe)-----------------------------------
14.321@94.73
9.) Matthew Jollymore (
2000greenz24)-----------------
14.328@96.1
10.) Bill T (
BlownBlackZ)--------------------------------------
14.330@96.37
11.) Mr. GM
97cavie2.4ls)-----------------------------------
14.3xx @ 96.xx (auto)
12.) Luke Heier (
heierlu) -----------------------------------
14.403@97.59
13.) Wade Jarvis (
z24stud84) ----------------------------
14.5xx @ ????
14.) Mike Heckman
icemike89)-----------------------------
14.8xx @92.xx (auto)
15.) Adam Borchardt (
Got2beGT)--------------------------
15.217@ 89.46
16.) Gus Spencer (
"Gus" - sweet98aedga)-------------
15.4x@90.xx
Edited 2 time(s). Last edited Friday, April 12, 2013 9:00 AM
It's nice to be injected but I love being blown.