HP Tuners Software update - Page 15 - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: HP Tuners Software update
Tuesday, February 07, 2006 2:35 PM
98redcavz24 wrote:

Well every few days I have been asking for an update on the forum over there and I finally got one from chris!
-------------------------------------------------------------------------------------------------------------
short update:

- reading/flashing complete, including recovery. We sacrificed a little on the write time to ensure recovery worked without problem. Tested for all 97-04 hardware.
- all the cavalier/sunfire is basically ready to go for beta, only a few tweaks
- S10 should be finished very soon
- Cobalt still in progress

i expect as soon as we start shipping the USB, beta will begin. Those who own a 97-04 cavalier/sunfire and wanna be on the beta make sure you get your hands on the MPVI interface, we are taking pre-orders already.

Chris...
--------------------------------------------------------------------------------

hey, what about 05s?


Some times the best way to get that tailgater off your but is to light a fart.

Re: HP Tuners Software update
Tuesday, February 07, 2006 5:50 PM
This is starting to sound very good.



Thats Him Officer The WICKED One.

Re: HP Tuners Software update
Tuesday, February 07, 2006 6:20 PM
98redcavz24 wrote:

we are taking pre-orders already.


very good sign, ty for the update



Sven you totally quarterloafed your computer..
Re: HP Tuners Software update
Tuesday, February 07, 2006 8:53 PM
Just got an email from keith. Beta testing will begin before the end of this month. Finally!



Blew it up
Re: HP Tuners Software update
Tuesday, February 07, 2006 10:28 PM
sooo... sounds like it might be out around the same time as the eco s/c kit afterall


___________________________________________________________________

15.71 @ 87.9mph 9-17-05
Re: HP Tuners Software update
Wednesday, February 08, 2006 3:06 AM
but the ecotecs arent coming out for a while correct? just 2.2 ohvs and 2.4's?



LE61T PTE6262 Powered

Re: HP Tuners Software update
Wednesday, February 08, 2006 6:00 AM
DAMNIT.. now I have to decide between tuning software or rims.

Grrr....just when you think you've got everything figured out things like this happen....

great to hear this finally happened.

Also to all those asshats on their board being negative when they push things like a vette in front of our development you have to realize they'll more than likely sell very few of these units in the beginning.

Now, do I get pro or std.....


-Chris

Re: HP Tuners Software update
Wednesday, February 08, 2006 6:49 AM
98redcavz24 wrote:

Just got an email from keith. Beta testing will begin before the end of this month. Finally!


this guy needs to POST this stuff, not email people because then not everyone is updated, if he did post it i havent found it.




Re: HP Tuners Software update
Wednesday, February 08, 2006 7:32 AM
How much will this tuning software Cost!???? Ive been waiting over 2 years for some kind of software to come out for my 01 2.4L...thanks for everyones help! This will be fun..now its our turn to prove our cars are worth something.
Re: HP Tuners Software update
Wednesday, February 08, 2006 7:34 AM
that's excellent news!!!


Watch out there nah!
Re: HP Tuners Software update
Wednesday, February 08, 2006 7:41 AM
I too have been waiting on software as well guys, but for my GTO

Right now it is 500 for the regular software and hardware, and 650 for the pro hardware. You will get a certain amount of credits to tune a limited number of vehicles. I hope it works out for you guys, HPT software is kick ass!





................Which car will hit 400 whp first???................

Re: HP Tuners Software update
Wednesday, February 08, 2006 9:16 AM
Any news is good news at this point.


15.3 @ 89.97mph, 14's on the way?
Re: HP Tuners Software update
Wednesday, February 08, 2006 10:10 AM
he does post updates but only on the hptuners forum it seems. Check in the VCM Suite General unde the 4 cylinder thread.


-Chris

Re: HP Tuners Software update
Wednesday, February 08, 2006 1:33 PM
well obviously i'm not one to lie



Blew it up
Re: HP Tuners Software update
Thursday, February 23, 2006 2:12 PM
The ecotec kit is out..... this would be the next step. I emailed Keith


Quote:

Yes, release date soon.

Keith Prociuk
HP Tuners LLC
www.hptuners.com

----- Original Message -----
From: <ge_forcez22@hotmail.com>
To: <sales@hptuners.com>
Sent: Monday, February 20, 2006 4:06 PM
Subject: VCM reflash


> I heard you guys were building a software program for 2000-2002
cavalier 2.4 LD9's... is this true? if so what is the release date? I
looked under products and didn't see anything listed, thanks


clearly I knew that there was talk, but this is also just a bump


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Re: HP Tuners Software update
Thursday, February 23, 2006 2:17 PM
ge_forcez22 wrote:

The ecotec kit is out..... this would be the next step. I emailed Keith


Quote:

Yes, release date soon.

Keith Prociuk
HP Tuners LLC
www.hptuners.com

----- Original Message -----
From:
To:
Sent: Monday, February 20, 2006 4:06 PM
Subject: VCM reflash


> I heard you guys were building a software program for 2000-2002
cavalier 2.4 LD9's... is this true? if so what is the release date? I
looked under products and didn't see anything listed, thanks


clearly I knew that there was talk, but this is also just a bump


you mean it is out for purchase? if so where?



LE61T PTE6262 Powered

Re: HP Tuners Software update
Thursday, February 23, 2006 2:24 PM
Quote:

you mean it is out for purchase? if so where?


his email just said,
Quote:

Yes, release date soon.






HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Re: HP Tuners Software update
Thursday, February 23, 2006 2:30 PM
I really want this software. Bye, bye use of fmu's.



Re: HP Tuners Software update
Thursday, February 23, 2006 2:33 PM
RELEASE DATE SOON..........ITS PREORDER FOR THE CONTROLLER RIGHT NOW...THE FIRST SHIPMENT SHOULD BE OUT ALREADY


*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Re: HP Tuners Software update
Thursday, February 23, 2006 2:52 PM
http://www.hptuners.com/forum/showthread.php?t=2940&page=4

click here sign in and leave some awesome post's about stuff, maybe they will give us more info. Always so short with everyone.... FRICK

Quote:

RELEASE DATE SOON..........ITS PREORDER FOR THE CONTROLLER RIGHT NOW...THE FIRST SHIPMENT SHOULD BE OUT ALREADY


Is that just v2.0 or something for a J-body? where did you find that info?


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Re: HP Tuners Software update
Thursday, February 23, 2006 2:58 PM
As soon as this comes out the piggy bank must die.



Beware the Rouge Dragon.


Re: HP Tuners Software update
Thursday, February 23, 2006 4:25 PM
do u have to have a laptop to use this?




Re: HP Tuners Software update
Thursday, February 23, 2006 4:27 PM
Yes





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: HP Tuners Software update
Thursday, February 23, 2006 5:50 PM
BlackEco wrote:

ATTENTION SHOPPERS!! THIS JUST IN,

The HP TUNERS SOFTWARE WILL BE RELEASED...... WHEN THE GM ECOTEC S/C KIT IS RELEASED !!

ge_forcez22 wrote:

The ecotec kit is out..... this would be the next step. I emailed Keith

QBE (73H 800573D 0N3) wrote:


you mean it is out for purchase? if so where?


I think this all plays along with this first post up top...... he was being sarcastic, just like the LD9 boyz were about the release of the GM S/C kit........ so in the last 2 weeks, it was posted that the S/C is now for sale....... like saying..... "when Hell Freezes over"...... well Hell Froze, now get doing what you where going to do....... kinda thing.....

To get in on the Beta Testing..... you need to purchase their Hardware...... the cable..... then let them know you want to be a J-body Beta tester..... and if they still need them, they would send you the software/license for the J-bodies......

Thats what I got out of Chris in one of the threads on HP Tuners....






SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
RACER X - '78 Opel Kadett W41 Swap

Re: HP Tuners Software update
Thursday, February 23, 2006 5:54 PM
anything on the 2.4?



Im a Xbox 360 fanboy...and damn proud of it!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search