HP Tuners Software update - Page 28 - Tuning Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: HP Tuners Software update
Friday, March 24, 2006 10:41 PM
slamcav wrote:

so this software would be worth the money if you have a 2002 2200. I would just have to set the stoich and it will work even with the stock map settings.


Again, the only person who can say its worth it or not is you.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!


Re: HP Tuners Software update
Saturday, March 25, 2006 9:20 AM
We should be ordering ours this week.







Re: HP Tuners Software update
Saturday, March 25, 2006 6:35 PM
I've recieved my cable

Pictures here: http://www.j-body.org/forums/read.php?f=46&i=211691&t=211691





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: HP Tuners Software update
Sunday, March 26, 2006 6:22 AM
awesome, i'm very interested in this.. but i will be buying the gm charger before this...

is there any date on when it will support the 2bar map sensor? or is it still up in the air?


-andy

'88 convt. sunbird GT turbo (project car)
'02 sunfire GT (daily driver)
email me
Re: HP Tuners Software update
Sunday, March 26, 2006 4:03 PM
Hi guys,

Here's an example of parameters supported for a 2004 Cav. Don't forget the scanner also has full GM PID (manufacturer specifc) support and also PCM Controls supported for these cars.

Cheers,

Chris...









Re: HP Tuners Software update
Sunday, March 26, 2006 4:42 PM
yea.........im gonna have to save up too i want i want and my car isnt even running yet............lol


*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Re: HP Tuners Software update
Sunday, March 26, 2006 4:44 PM
ihave a old laptop. what are the Requirements to run this software?
thanks
Re: HP Tuners Software update
Sunday, March 26, 2006 4:57 PM
Quote:

System Requirements
Minimum Requirements:
Windows 98SE or Better
350 MHz PC or Laptop
64 MB of RAM
USB Port

Recommended Requirements:
Windows 2000/XP or Better
650 MHz PC or Laptop
128 MB of RAM








Re: HP Tuners Software update
Sunday, March 26, 2006 6:05 PM
Looks great!


15.3 @ 89.97mph, 14's on the way?
Re: HP Tuners Software update
Sunday, March 26, 2006 8:55 PM
Any chance this will work for the 02-05 N-body? Same engine and transmission.
Re: HP Tuners Software update
Sunday, March 26, 2006 8:58 PM
^ Yes it will, might have to email them your VIN number first, but they will support it.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!


Re: HP Tuners Software update
Sunday, March 26, 2006 9:07 PM
how noob friendly is this software? I know alot about computers but im no engineer when it comes to cars. How easily would a novice car enthusiats such as myself be able to use this software and understand it?


2006 Black Cobalt SS Supercharged G85
13.91@102.77
Re: HP Tuners Software update
Sunday, March 26, 2006 9:17 PM
They make it pretty easy. Each item has a description at the bottom of the window, and there are "user levels". You can select levels of things between beginner and expert, that allows you to see more and more detail.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: HP Tuners Software update
Sunday, March 26, 2006 9:20 PM
thats cool^^^^^^ i will def be using the beginner till i get the hang ofit


*************Yea i spell liek wrong get over it*****************
** If i write in caps its cause im @ work and i can only write in caps cause the keyboard is a retarded CAPS only keyboard.**
Re: HP Tuners Software update
Sunday, March 26, 2006 9:25 PM
it would be nice if there was a button u could click and it gave u the best tune u could get and gives u the best numbers u can get out of ur motor. lol..that would be my "easy button"



MY 2003 SUNFIRE 15.63@87.86mph

"A N/A ecotec is not gonna give Honda's and Mitsu's that much of a run for their
money unless their blown or bottle fed.GM is still smokin crack!"
~1QWKZ24
www.streetracing.org, 08/2001
Re: HP Tuners Software update
Sunday, March 26, 2006 9:37 PM
Ohh3SunFire wrote:

it would be nice if there was a button u could click and it gave u the best tune u could get and gives u the best numbers u can get out of ur motor. lol..that would be my "easy button"


Nice... but impossible. The "best possible" tune changes with even just the weather in your area.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: HP Tuners Software update
Monday, March 27, 2006 6:50 AM
Looks in wallet, damn it no money. Need to start saving again.
Super Excited.






Re: HP Tuners Software update
Tuesday, March 28, 2006 8:24 AM
so im confused since ppl are actually getting it now is it still in beta or is it the full deal?



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Re: HP Tuners Software update
Tuesday, March 28, 2006 8:36 AM
open beta. anyone can order it.


2004 Cavalier, 2.2L Ecotec
1965 El Camino, 396 BBC, 14:1, 800 BHP
Re: HP Tuners Software update
Thursday, March 30, 2006 12:13 PM
97 z24 with HO cams <--- Can i benifit at all with this software ? does it resemble the Chip for the w41 cams ?
Re: HP Tuners Software update
Thursday, March 30, 2006 12:32 PM
HO cams...so you took the cam towers off of the 2.3 engine, because the HO cams have too much lift for the 2.4 cam towers....you must have the secret cams.

Re: HP Tuners Software update
Thursday, March 30, 2006 1:01 PM
yea i know i have the Lo 2.3l cam and the HO 2.3l with the tower.. but there is really no use for them untill high rpm's .. thats why im trying to figure out if i can benifit of this Software if not i just plan to go with OBD1 with w41 cams and mantapart chip.
Re: HP Tuners Software update
Thursday, March 30, 2006 1:35 PM
everybody needs to read thru these posts. all these ques have been answered several times. this is so damn repetitive its rediculous. read the faq about it. but in short, yes it will benefit if u want to run ho cams. but u will need to know what parameters to edit. u just cant expect to plug it in and be done. if u tune it wrong u can blow up the motor.



Don't steal, the government doesn't like competition
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search