What size nut is needed to double nut the roller rockers on the studs, so that the nuts will not back off anymore? I'm having a problem with the nuts that I got from jbodyperformance.com that came with the roller rockers that I ordered.
ITS ALL FUN IN GAMES TILL SOMEONE GETS SHOT IN THE LEG
does anybody know what to do to stop the nuts from coming loose . ive tried using the red tread lock and it just wont hold . any ideas.
ITS ALL FUN IN GAMES TILL SOMEONE GETS SHOT IN THE LEG
use squash nuts...they are oval in shape..phil
Poly locks. But the nut is likely 3/8 if you're using 1.6 rollers. The stock stud is 10mm but to use 1.6 rollers requires an stud that's 10mm at the base and 3/8" for the rocker. I did a valve lash on my stock rockers and double nutted it for the same reason. They kept backing off.
Be kind to dragons, for you are crunchy and taste good with ketchup.
Where can I find these kinds of nuts? and how much do they normally run? thanks
ITS ALL FUN IN GAMES TILL SOMEONE GETS SHOT IN THE LEG
this isnt a bump
ITS ALL FUN IN GAMES TILL SOMEONE GETS SHOT IN THE LEG
hotfire wrote:this isnt a bump
lol
I'd try contacting ARP, they have everything
fortune cookie say:
better a delay than a disaster.
I got some from a local engine shop. A friend of mine knows the owner and he hooked us up. Honestly, I have no idea if Jegs or Summit has them in the catalog, but if you go to a place that builds race engines they should be able to help. The guy I got them from charged me $.25 each, so four bucks. When it warms up a bit I'm going to install them and see how they work.
Be kind to dragons, for you are crunchy and taste good with ketchup.
