New member from Quebec - Page 2 - Newbies Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: New member from Quebec
Friday, March 13, 2020 3:50 AM
Im pretty sure the only people that ever had that color green were retirees lol

It's not a bad color though thats for sure.


DRIVING FORCE FABRICATIONS




Re: New member from Quebec
Sunday, April 12, 2020 5:19 AM
oil extractor it is good ? for change oil

mechanics are prohibited in my parking

oil extractor remove all oil in pan ?
Re: New member from Quebec
Sunday, April 12, 2020 5:23 AM

and the oil filter is easy to remove

oil change fast and clean
Re: New member from Quebec
Monday, April 13, 2020 5:06 AM
Oil extractors aren't too bad, they dont quite get as much out of the pan as a full drain will but nothing too terrible to worry about.

The oil filter on a 2200 though will make more mess than draining oil out of the pan unfortunately.

Oil filter is on the back passenger side of the engine. If you don't still have the black intake support piece there is easy to get to from the top. If you do still have that there then it's a little arm twisting.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Wednesday, April 29, 2020 11:02 AM
thanks i change my oil, with the extractor good 3.5 L removed

3,8 L probably with the oil filter, yes a lot of oil drop.
next time a cardboard below.

i change my radio put new deck Kenwood,

the cluster, odometer off
frequent problem? after put new radio ?
Re: New member from Quebec
Wednesday, April 29, 2020 11:50 AM
and Chevy Beretta wheels and steering fit on cavalier 2001 ?
Re: New member from Quebec
Wednesday, April 29, 2020 11:51 AM

Re: New member from Quebec
Wednesday, April 29, 2020 11:53 AM
Z26 wheels
Re: New member from Quebec
Wednesday, April 29, 2020 1:33 PM
Wheels yes but the steering wheel is 50/50 they switched splines and i can't remember if it was all 00+ or 02+ that had the new style.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Friday, May 01, 2020 10:19 AM
good, i put p flow on stock intake with 3'' metal pipe, nice sound, little bit performance but how to remove stock box cavity ?
Re: New member from Quebec
Friday, May 01, 2020 10:44 AM
for more space better remove this cavity, i think, remove battery simply

Re: New member from Quebec
Friday, May 01, 2020 10:55 AM
Yup take you the battery, and move the fuse box to the side.

And since you don't have the stock intake anymore might as well take the intake bong out of the fender.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Friday, May 01, 2020 12:40 PM
better with full cold air intake, vs stock intake
nice sound, spectre p flow, fuel economy ? or nothing

Re: New member from Quebec
Friday, May 01, 2020 12:53 PM
Basically no difference in performance, but get more intake sound.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Friday, May 01, 2020 1:19 PM
more air in engine = need change exhaust line ?
Re: New member from Quebec
Friday, May 01, 2020 1:40 PM
No, you're not really taking in any more air.

Won't be an exhaust unless you want more sound.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Saturday, May 02, 2020 3:25 PM
Nice Saturday 17 C






Re: New member from Quebec
Tuesday, May 12, 2020 3:35 PM

clubcav.com
was the old forum?

i see cavalier with clubcav.com sticker
Re: New member from Quebec
Wednesday, May 13, 2020 4:51 AM
Car's looking clean.

That was another forum, was kind of third rate never ended up as good as JBO.



DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Thursday, May 14, 2020 3:54 PM
problem with theft mode, random not starting

but crank, cut yellow wire for bypass theft mode ?
Re: New member from Quebec
Thursday, May 14, 2020 3:55 PM
sometime start

Re: New member from Quebec
Friday, May 15, 2020 4:35 AM
Try doing a relearn first.

I can't tell you if this method works on 00+ since I've always used HPTuners if I needed to disable passlock but maybe check into it.

http://www.j-body.org/forums/read.php?f=30&i=61640&t=61640

Keep hunting through old posts on here, I know i'ts been covered at one point or another.


DRIVING FORCE FABRICATIONS



Re: New member from Quebec
Friday, May 15, 2020 9:16 AM
i cut the yellow wire, after anti theft light come off,

car running, i just cut the wire

solved thanks
Re: New member from Quebec
Friday, May 15, 2020 9:18 AM

Re: New member from Quebec
Friday, May 15, 2020 9:35 AM
HAHA well that works


DRIVING FORCE FABRICATIONS



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search