Vulcan Turbo's M62 manifold for the 2.4 - Page 8 - Boost Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, August 28, 2009 4:24 AM
Pretty cool idea, Vulcan should definetely look into making a conversion kit for the ECO crowd so they can switch to an air to air if this pans out.




Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, August 28, 2009 7:06 AM
Jn2 wrote:

[ion wrote:

C2]How the heck are you fitting it in there?


this is a full set up,
-blower outlet,
-hot pipe,
-intercooler,
-cold pipe,
-and customer intake manifold to allow it all to work

not using the stock or quad manifold

No @!#$ I know that... I just don't see how it can fit. Whenever you guys get over your fear of image posting, I can't wait to see it.

Jn2 wrote:

the regualar setupalone will consist of the blower outlet, and the intake manifold, that way u can run w/e piping and intercooler u want..im sure prices will change from what is listed on the site, those who have already paid, or who hae put in down payments, their cost will be honored...

Since you guys are saying it's actually about $400 cheaper, sucks for those who've paid, ha.



Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, August 28, 2009 7:27 AM
[ion wrote:

C2]

Jn2 wrote:

the regualar setupalone will consist of the blower outlet, and the intake manifold, that way u can run w/e piping and intercooler u want..im sure prices will change from what is listed on the site, those who have already paid, or who hae put in down payments, their cost will be honored...

Since you guys are saying it's actually about $400 cheaper, sucks for those who've paid, ha.


Not at all the case. You would not say that if you knew what we paid.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Vulcan Turbo's M62 manifold for the 2.4
Friday, August 28, 2009 7:45 AM
i gotta agree with wade. paid a good price



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, August 31, 2009 6:53 AM
well i hope this week will be a good week for progress/



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Monday, August 31, 2009 9:07 AM
should be, vacation is over :p



Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 9:04 AM
Well im back, ive actually been back since thursday, this thing should be ready... tonight. The main assembly of the manifold is 100% done and welded, we just are going to weld on the inlet / outlet tube, some vac fittings, and the bypass valve tube (which is going to be O-Ringed for a perfect seal), throw some thermal coating on it and well post up some pictures, i would say tonight you can expect some "un-blocked" pictures.
Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 10:04 AM
got to say guys, i have seen the manifold itself, looks damn good that it does



Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 2:43 PM
well im waiting for pictures......



http://www.cardomain.com/ride/2623318



Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 5:15 PM
jared methe wrote:

well im waiting for pictures......




LE61T PTE6262 Powered

Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 5:58 PM
Qwibby {T3H Old QBE} wrote:

jared methe wrote:

well im waiting for pictures......




8 psi with m62 and IAT under 100

Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 7:38 PM
Just needs coating, other than that... its done! Ill coat her in the morning and post the pictures. Thanks!
Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 7:43 PM
we dont care about coating we want to see it now!



LE61T PTE6262 Powered

Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 9:30 PM
what kind of 'coating' exactly?

i vote ceramic so it matches the steigemeyer blower wade will be getting.



Familiar Taste of Poison.
Re: Vulcan Turbo's M62 manifold for the 2.4
Wednesday, September 02, 2009 11:22 PM
z yaaaa wrote:

what kind of 'coating' exactly?

i vote ceramic so it matches the Harrop blower wade will be getting.




Edited 1 time(s). Last edited Wednesday, September 02, 2009 11:27 PM


8 psi with m62 and IAT under 100
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 5:32 AM
i stand corrected.



Familiar Taste of Poison.
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 7:02 AM
Cant wait to see the finished setup




Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi

LG0/LD9 for Life
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 9:35 AM
seen the pics, man this think looks sweeet :p



Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:21 AM
mmmmm it looks so pretty, i left my digital camera at home, give me gotta quick finish a car here in the shop so i can go grab it, snap some pics and post.
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:22 AM
x_x



Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:25 AM
boooooooo, i wanna see pics




Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:45 AM
Alright.... Here is the final product.








Flame away!
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:48 AM
Only thing I see that I would want changed if I could afford another build, would be to add a fitting for the PCV passage in the head.



Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:49 AM
Manifold Specifications:

MP62 to LD9 Adapter Manifold
Suited for External Aftercooler Setup
Inlet / Outlet Diameter: 2.25"
Primary Runner Diameter: 2.00"
Vacuum Ports: 4 Total, 3 - 1/8NPT, 1 - 1/4NPT
Bypass Valve Seals with O-Ring
Coating is a light Thermal Coating - Colors will likely not be available.


And the manifold is dirty when you see fingerprints and all that stuff on it in the last picture.
Re: Vulcan Turbo's M62 manifold for the 2.4
Thursday, September 03, 2009 11:56 AM
mitdr774 wrote:

Only thing I see that I would want changed if I could afford another build, would be to add a fitting for the PCV passage in the head.


Vulcan: Does the flange have this port in it just like the m45 has? I know this was something we had discussed being done way back when in the other thread.

Since I know somone else is going ask. Where are you at with the PCV baffle, TB adapter and charge piping. When do you expect it to be complete and have you had a chance to update prices on the site?


Edited 1 time(s). Last edited Thursday, September 03, 2009 12:03 PM


FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search