Fully aware of that. Just was being lazy.
Also, crankps keeps acting up. Once warm it acts like it shops scouting one tooth one the trigger wheel.....
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:Fully aware of that. Just was being lazy.
Also, crankps keeps acting up. Once warm it acts like it shops scouting one tooth one the trigger wheel.....
lol i thought it wouldve made it easier my bad
Keep us updated when you fix the issues im super interested in whats going on with it
Wow phone killed that last part....it should read.
Also, crankps keeps acting up. Once it warms up it acts like it stops counting one tooth on the trigger wheel.....
I purchased a new one Friday. Haven't had time to install it, though.
Edited 1 time(s). Last edited Monday, April 02, 2012 3:53 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Bad ICM now swapped with old ICM. Runs like normal again.
Passed emission check and ordered my custom plates!
I hope a LOT more to come now that its running well.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Club Teh Jeffie wrote:so gay
Hey no axle for you...I kid I kid.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Its only been how many years coming?
Awesome Mike! Congrats bud, drive it, and enjoy!
ohh yeaaa
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Thanks everyone. Plans are to finish a few things up, and enjoy it for a little while....then rip it apart and install a lot more parts.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
May be time to start the part swapping. It has been long enough lol....
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
good to see this thing out and about. i guess moving got you motivated. lol
The door moldings are coming off for sure. The tails...are staying. Remember I had 95-99 toyos.
I do have 95 tails with the seperate turn signals in them..........
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
approved
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
I like it... pics really make me wanna get my car back on 95-99 wheels... 00+ work for now but i miss them.
Plates came in the mail Saturday. If id doesn't rain everyday this week. Maybe I'll wash and wax it.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
the wife thought the second photo was hilarious. Wideband, oil pressure, and trans temp gauges rewired and wires are hidden. Also installed the sunfire "kick" panel under the dash. I think all j-bodies should come with one.
Also, now just working on installing my boxes of parts!!!
Edited 1 time(s). Last edited Monday, May 14, 2012 5:06 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
lol that looked like me upside down in the car this weekend ha
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
David, you probably fit better.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO