Project Phoenix - Page 7 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Project Phoenix
Sunday, July 13, 2008 8:19 AM
z yaaaa wrote:pissed off?? it would take all of 2 minutes with a can of carb spray and a rag.


and then you have carb cleaner on the prep area. spray paint can be pretty nasty stuff. I have seen basecoats react to spray paint before and its pretty annoying when you have to start over when your that close to being done. .



Edited 1 time(s). Last edited Sunday, July 13, 2008 8:20 AM



Re: Project Phoenix
Sunday, July 13, 2008 8:20 AM
Flat black lip kit just looks like you didn't have the money to paint it and slapped in on like 90% of the ricers out there, IMO it looks like crap, even if it were gloss black it would still look stupid without a real two-tone....





Paint Signature FTMFW!^
Re: Project Phoenix
Sunday, July 13, 2008 8:42 AM
where are teh gad damn pics curt


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Project Phoenix
Sunday, July 13, 2008 8:55 AM
Matt Gorman(ECOjunkk) wrote:where are teh gad damn pics curt


Pics of what, I'm not doing sh!t today. I've worked on one or the other every day since a week ago wednesday. I'm taking a day off lol.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Sunday, July 13, 2008 9:49 AM
Skunk wrote:
Qwik2k2z24 wrote:Glad you took my advice




Lack of options would be more accurate. But if you wanna take credit that's fine.


Just glad that front bumper is gone. One less hack job piece on the car.





BeardLife / Club Awesome Reject Blog
Re: Project Phoenix
Sunday, July 13, 2008 10:53 AM
Qwik2k2z24 wrote:
Skunk wrote:
Qwik2k2z24 wrote:Glad you took my advice




Lack of options would be more accurate. But if you wanna take credit that's fine.


Just glad that front bumper is gone. One less hack job piece on the car.


Excuse me? Keep the dick head stuff out will ya? While you may have not liked it, that doesn't matter it wasn't your car. I liked it, it fit fine for me. You didn't like it so what. A few others didn't, your point being? I've said it before, and I'm sure I'll have to say it again...IT'S MY CAR, I'LL MOD IT HOW I FEEL!!!!!!



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Sunday, July 13, 2008 11:06 AM
i agree skunk your car your mods your taste dude. keep up the good work and hope to see u up in wisconsin again. i like the blue one and the white one so in my book good taste.



Re: Project Phoenix
Sunday, July 13, 2008 11:12 AM
Skunk wrote:
Qwik2k2z24 wrote:
Skunk wrote:
Qwik2k2z24 wrote:Glad you took my advice




Lack of options would be more accurate. But if you wanna take credit that's fine.


Just glad that front bumper is gone. One less hack job piece on the car.


Excuse me? Keep the dick head stuff out will ya? While you may have not liked it, that doesn't matter it wasn't your car. I liked it, it fit fine for me. You didn't like it so what. A few others didn't, your point being? I've said it before, and I'm sure I'll have to say it again...IT'S MY CAR, I'LL MOD IT HOW I FEEL!!!!!!








BeardLife / Club Awesome Reject Blog
Re: Project Phoenix
Sunday, July 13, 2008 11:45 AM
yellow02eco wrote:i agree skunk your car your mods your taste dude.



man, people want to be politically correct on the net too....

i need to remember to ask Karo about the control arm bushings next time he calls me... should be next week.

Chris


'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Project Phoenix
Sunday, July 13, 2008 1:19 PM
The steelies on the white cav, dont look like normal 15s or 14s. Maybe its just me, but arnt those a set of 17" steelies?



Re: Project Phoenix
Sunday, July 13, 2008 1:40 PM
^^^ they are 17's... off an impala IIRC.. cop car to..

he needs them because he has the NWF front brakes...




Re: Project Phoenix
Sunday, July 13, 2008 2:04 PM
z yaaaa wrote:^^^ they are 17's... off an impala IIRC.. cop car to..

he needs them because he has the NWF front brakes...


Misinformation like a mofo.


Those are 16" HD Impala steelies.



Re: Project Phoenix
Sunday, July 13, 2008 5:17 PM
How would you know Tom!



Chris




'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08

Re: Project Phoenix
Sunday, July 13, 2008 5:54 PM
z yaaaa wrote:^^^ they are 17's... off an impala IIRC.. cop car to..

he needs them because he has the NWF front brakes...


I never said they were 17's bud, they're 16's always have been and off an impala just like tommy said.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Sunday, July 13, 2008 6:12 PM
Fun times this weekend....I think outta the 3 people that were with me, each one after riding in your car had to ask me if i had it to the floor when following you.............i hate you. LOL had a good time Saturday, ill get pics of my mods up in my last post when i get back to school.



Re: Project Phoenix
Sunday, July 13, 2008 6:26 PM
Hey here's an odd thing to say, looking for a stock 95-99 Z rear bumper w/ the filler panels. If anyone has one or can get me one let me know.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Sunday, July 13, 2008 7:00 PM
Just checked image manip and...

Godspeed wrote:


OMFG!!!!!!



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Monday, July 14, 2008 2:37 AM
NOW THAT LOOKS NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Re: Project Phoenix
Monday, July 14, 2008 3:09 AM
285whpcavy wrote:NOW THAT LOOKS NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Too bad the new one won't have the same kit, same hood and headlights, but I've finally settled on what I'm doing exterior wise on the white car. Base 03+ front, 95-02 Z24 Sides and a 95-99 Z24 rear.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Re: Project Phoenix
Monday, July 14, 2008 6:22 AM
oh, sorry.



Edited 1 time(s). Last edited Monday, July 14, 2008 6:24 AM


Re: Project Phoenix
Monday, July 14, 2008 8:16 PM
One update...















21.8psi!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and WOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!



Re: Project Phoenix
Monday, July 14, 2008 8:19 PM
Skunk wrote:One update...















21.8psi!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and WOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!


wow slow...lol..i have two red rear bumper filler panels..i will bring them with me to bash if your going to come up..


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: Project Phoenix
Monday, July 14, 2008 8:26 PM
that chop of ur car looks so hot



Re: Project Phoenix
Monday, July 14, 2008 8:27 PM
vids please



Re: Project Phoenix
Tuesday, July 15, 2008 3:17 AM
Matt Gorman (ECOjunkk wrote:getting it actually running


Hmmmmm....

The more you comment the more you seem like your a complete ass and full of @!#$. 21.8psi on 10:1 compression slow? You're a tool.



---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!


Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search